搜索结果: 1-7 共查到“工学 Low C steel”相关记录7条 . 查询时间(0.109 秒)
SAW surfacing of low-alloyed steel with super-ferrite additional material
Welding SAW Surfacing
2010/1/19
Purpose: of these researches was to investigate influence of heat input in SAW surfacing of low-alloyed steel with super-ferrite filler material on quality of deposits.
Design/methodology/approach: t...
On the Creep Strength-Rupture Ductility Behaviour of 1.25Cr-0.5Mo Low Alloy Steel
Low Alloy Ferritic Steel Rupture Ductility Creep Strength Rupture Ductility Trough
2009/10/14
It is important to select materials having both high strength and good ductility in most engineering applications. This is also true for high temperature problems and the requirement of high creep str...
Cladding of High Mn Steel on Low C Steel by Explosive Welding
Explosive welding Cladding High Mn steel Low C steel
2009/10/12
High Mn steel containing about 16% Mn was cladded to a low C steel by explosive welding. The
experimental results showed that the bonding interface has a wavy morphology; the welding interface has th...
Low alloy steel versus ADI - differences and similarities
ADI Low alloy steel Structure Difference Similarities
2011/3/29
The results of comparison between the microstructure of selected bainitic low alloy steel and austempered ductile iron ADI are presented.
The aim of the comparison was to find out differences and si...
Microstructural and hardness chara-cterisation of sintered low alloyed steel
Powder metallurgy Steel Hardness Microstructure
2010/2/4
Purpose: The purpose of the present study is to produce low ally PM steel without any addition and with addition of ferro-boron addition by conventional PM manufacturing route at the different sinteri...
Mechanical properties and structure of the Cr-Mo-V low-alloyed steel after long-term service in creep condition
Mechanical properties Structure Phase analysis
2010/2/10
Purpose: of this paper is to present the changes of the mechanical properties and structure in material components of the power station boiler after long-term creep service made of Cr-Mo-V low-alloyed...
Heat treatment and mechanical properties of low-carbon steel with dual-phase microstructure
Heat treatment DP-type steel Martensite Mechanical properties
2010/2/22
Purpose: The aim of the paper is to design heat treatment conditions of dual-phase steel and to determine their influence on the structure and mechanical properties of steel.
Design/methodology/appro...