工学 >>> 力学 农业工程 林业工程 工程与技术科学基础学科 测绘科学技术 材料科学 矿山工程技术 石油与天然气工程 冶金工程技术 机械工程 光学工程 仪器科学与技术 动力与电气工程 能源科学技术 核科学技术 电子科学与技术 信息与通信工程 控制科学与技术 计算机科学技术 化学工程 纺织科学技术 印刷工业 服装工业、制鞋工业 轻工技术与工程 食品科学技术 土木建筑工程 水利工程 交通运输工程 船舶与海洋工程 航空、航天科学技术 兵器科学与技术 环境科学技术 安全科学技术 工业设计
搜索结果: 1-15 共查到工学 Plug相关记录15条 . 查询时间(0.062 秒)
据世界天然气2022年8月5日消息称,美国能源公司新堡垒能源公司(NFE)已与同行氢公司Plug Power签署协议,在得克萨斯州博蒙特附近建造一座120兆瓦的工业规模绿色氢工厂。
Synthetic Aperture Radar (SAR) satellite systems may give important contribution in terms of Digital Surface Models (DSMs) generation considering their complete independence from logistic constraints ...
Plug-in Hybrid Electric Vehicles (PHEV) are new generation Hybrid Electric Vehicles (HEV) with larger battery capacity compared to Hybrid Electric Vehicles. They can store electrical energy from a dom...
Todaytransportationisoneoftherapidlyevolvingtechnologiesintheworld.With thestringentmandatoryemissionregulationsandhighfuelprices,researchersand manufacturersareeverincreasinglypushedtothefrontierso...
A plug-flow reactor coated with carbon-doped TiO2 (C-TiO2) powder was investigated for the control of vaporous aromatics (benzene, toluene, ethylbenzene, and o-xylene (BTEX)) under a range of experime...
针对火炮炮身的模态参数在测量次数、测量数据的准确性方面难以得到充分保证的问题,提出一种利用 ABAQUS 软件二次开发功能制作火炮炮身的参数化建模及模态分析插件的方法。运用ABAQUS 自带的RSG 编制炮 身的参数化建模界面与模态分析图形界面,并编写对应的内核脚本程序使其成为完善的图形界面,研究了温度及质 量变化对炮身模态的影响,实现了快速创建、修改模型等参数化操作。分析结果证明:该方法提高了分...
针对现有穴盘苗移栽机工作过程中易伤苗、作业效率低等问题,设计了移栽机末端执行器。根据移栽机实际移栽作业要求,采用SolidWorks进行末端执行器虚拟样机设计,并采用COSMOSMotion插件分析机械手指运动轨迹,联合COSMOSWorks插件进行基质有限元模型分析。运动模拟试验表明机械手指水平位移量主要受斜楔块位移量Δh影响,而垂直位移量主要受机械手指初始插入角度α影响,并且机械手指产生...
Multitest的Plug Yield™使用户能够将内部资源集中于其核心业务。当Multitest处理测试配置的协调、整合和优化等方面时,Plug Yield™帮助用户节省了时间和资金。该公司还对项目进行从规划到部署阶段的全面管理。
High power damage threshold test and thermal simulation for plug-style optical attenuator were carried out. The degradation mode and its mechanism were clarified. The limit in high power level for ass...
To improve the performance of any metal forming process, a minimization in the process load parameters is needed. The used die geometry significantly affects the process performance. Several die desig...
应用PSAT前向仿真软件及矩阵分割全局优化算法,对并联式Plug-in混合动力汽车(PHEV)在不同电能消耗续驶里程(CDR)下的能量管理策略进行了优化设计研究。结果表明:PHEV电能消耗续驶里程越大,优化控制参数对整车经济性影响越小;小CDR优化控制参数的整车平均经济性能好于大CDR优化控制参数;利用优化设计得到的PHEV能量管理策略可以使整车平均等价油耗降至2.70 L/(100km),相对于...
This paper proposes plug and play techniques for optical network configuration. The techniques can reduce the manual operation labor needed to commence services and simplifies management activities.Ev...
A single cylinder vertical air-cooled diesel engine was modified to use LPG in dual fuel mode to study the performance, emission, and combustion characteristics. The primary fuel, liquefied petroleum ...
December 14, 2006,Demonstrating its commitment to explore new technologies, California Energy Commission yesterday approved $3 million to University of California, Davis for a plug-in hybrid electric ...
December 11, 2006,RICHLAND, Wash. – If all the cars and light trucks in the nation switched from oil to electrons, idle capacity in the existing electric power system could generate most of the electr...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...