搜索结果: 1-8 共查到“有色金属及其合金 wear”相关记录8条 . 查询时间(0.14 秒)
The application of statistical models in wear resistance simulations of Al-Al2O3 composites
Composites Infiltration Simulation Statistical models
2010/8/17
Currently, the most widespread use have found the composite materials with the light metals matrix, and especially from the aluminium alloys, reinforced with the ceramic particles or fibres that can b...
Wear Resistance of Gold Alloys for Coinage.
Friction and Wear Performance of Gold and Gold Alloy Films.
The Abrasive Wear of Gold Jewellery Alloys.
Mechanical properties and wear resistance of magnesium casting alloys
Heat treatment Mechanical properties Fracture mechanics
2010/2/4
Design/methodology/approach: A casting cycle of alloys has been carried out in an induction crucible furnace using a protective salt bath Flux 12 equipped with two ceramic filters at the melting tempe...
Slurry wear characteristics of zinc-based alloys: Effects of sand content ofslurry, silicon addition to alloy system and traversal distance
zinc-based alloys slurry wear behaviour material removal mechanisms erosion− corrosion− abrasion
2010/3/17
This investigation deals with the observations pertaining to the effects of specimen and slurry compositions as well as traversal distance on the slurry wear response of a zinc-based alloy. The compos...
Corrosion and wear behaviors of Al-bronzes in 5.0% H2SO4 solution
Al-bronze corrosion friction wear strain hardening
2010/3/17
Steady-state corrosion and wear behaviors of two Al-bronzes, Cu-14Al-X and QAl9-4, in 5.0% H2SO4 solution were investigated. It is found that wear loss of bronzes in 5.0% H2SO4 solution is lower than ...
Low friction and wear resistant coating systems on Ti6Al4V alloy
Surface treatment Glow-discharge treatment Duplex treatment
2010/2/8
Purpose: Development of an original multiplex hybrid treatment of Ti6Al4V alloy: diffusion hardening+intermediate hard gradient TiCxNy layer with use of continuous CAE+top low friction and wear resist...