搜索结果: 1-7 共查到“口腔材料学 CAD/CAM”相关记录7条 . 查询时间(0.222 秒)
Effect of Sintering on the Marginal and Internal Fit of CAD/CAM-fabricated Zirconia Frameworks
Zirconia ceramics CAD/CAM system Framework
2009/9/14
The aim of this study was to investigate the effect of post-machining sintering on marginal and internal fit of CAD/CAM-fabricated zirconia frameworks. Single crown copings (A: abutment), three-unit b...
Bonding Strength of Resin Cement to Silicate Glass Ceramics for Dental CAD/CAM Systems is Enhanced by Combination Treatment of the Bonding Surface
Glass ceramics Shear bond strength Surface modification
2009/9/14
To increase the bond strength of CAD/CAM-fabricated, leucite-reinforced glass ceramics with a resin cement, the effects of the following were investigated: surface modification by tribochemical (TBC) ...
Machining Accuracy of Crowns by CAD/CAM System Using TCP/IP: Influence of Restorative Material and Scanning Condition
TCP/IP CAD/CAM Machining accuracy
2009/9/14
The purpose of this study was to determine the optimal condition for fabricating accurate crowns efficiently using an internet-based CAD/CAM system. The influences of three different CAD/CAM restorati...
Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system
Preparation angle Zirconia Precision
2009/9/14
The aim of this in vitro study was to evaluate the effects of different preparation angles on the precision of fit of zirconia crown frameworks. Dies were fabricated with three different preparation a...
Marginal and Internal Fit of All-ceramic Crowns Fabricated with Two Different CAD/CAM Systems
Marginal and internal fit All-ceramic crown CAD/CAM system
2009/9/11
This study evaluated the accuracy of marginal and internal fit between the all-ceramic crowns manufactured by a conventional double-layer computer-aided design/computer-aided manufacturing (CAD/CAM) s...
A review of dental CAD/CAM:current status and future perspectives from 20 years of experience
CAD/CAM Crowns and fixed partial dentures Digitizing Network Zirconia
2009/9/11
In this article, we review the recent history of the development of dental CAD/CAM systems for the fabrication of crowns and fixed partial dentures (FPDs), based on our 20 years of experience in this ...