搜索结果: 1-15 共查到“carbides”相关记录15条 . 查询时间(0.046 秒)
Universal phase transitions of B1 structured stoichiometric transition-metal carbides
Universal phase transitions
2010/11/23
High-pressure phase transitions of B1 structured transition-metal carbides (TiC, ZrC, HfC, VC, NbC, TaC) were systematically researched by ab initio calculations. It was found that these carbides unde...
镶嵌固体润滑剂的自润滑刀具切削温度研究（Cutting Temperature of Cemented Carbides Base Self-lubricated Tool Embedded with Solid Lubricants）
干切削 切削温度 自润滑刀具 摩擦磨损特性
2010/1/28
在刀具前刀面月牙洼磨损区域加工装填MoS2固体润滑剂的微孔，制备了一种镶嵌固体润滑剂的自润滑刀具（SLT-1），并与前刀面有孔但无固体润滑剂的刀具（SLT-2）以及传统刀具（SLT-3）进行切削对比试验。用TH5104红外热像仪测试了3种刀具切削45号淬火钢的切削温度变化规律。结果表明：SLT-1自润滑刀具的切削温度明显降低，比传统刀具SLT-3降低15%～20%，SLT-2刀具比SLT-3降低5...
Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics
Tool materials Thin & Thick coatings Sialon
2009/12/3
Purpose: The aim of this paper was investigated structure of sintered carbides WC-Co type and sialon tool ceramics with wear resistance ternary coatings TiBN type deposited by cathodes arc evaporation...
The Mössbauer spectroscopy studies of ε to cementite carbides transformationduring tempering of high carbon tool steel
Mö ssbauer spectroscopy CEMS Steel Tempering Iron carbides
2009/12/2
Purpose: This work presents results of investigations using Mössbauer spectroscopy technique and their
interpretation concerning transformation of ε to cementite carbides during tempering in rel...
Optimization of Conditions to Produce Manganese and Iron Carbides from Denizli-Tavas Manganese Ore by Solid State Reduction
Solid state reduction manganese carbide iron carbide
2009/10/9
In this work, optimization of conditions in the production of manganese-iron carbides from Denizli-Tavas manganese ore by solid state carbothermic reduction in argon atmosphere has been investigated. ...
Bainitic nodular cast iron with carbides obtaining with use of Inmold method
Innovative foundry technologies and materials TDA method Nodular cast iron with carbides Bainite
2011/3/31
In these paper bainitic nodular cast iron with carbides as-cast obtaining has been presented. This cast iron has been obtained with use of Inmold method. It was shown, that there is the possibility...
Bainitic nodular cast iron with carbides obtaining with use of Inmold method
Innovative foundry technologies and materials TDA method Nodular cast iron with carbides Bainite
2011/3/31
In these paper bainitic nodular cast iron with carbides as-cast obtaining has been presented. This cast iron has been obtained with use of Inmold method. It was shown, that there is the possibility...
Precipitation of carbides in Cr-Mo-V cast steel after service and regenerative heat treatment
Metallographic Heat Treatment Cast Steel Carbides
2011/3/29
The paper presents results of research on precipitation processes in chromium – molybdenum – vanadium cast steel. The examined material was the following cast steel grade: L21HMF and G17CrMoV5 – 10 (...
Precipitation of carbides in Cr-Mo-V cast steel after service and regenerative heat treatment
Metallographic Heat Treatment Cast Steel Carbides
2011/3/29
The paper presents results of research on precipitation processes in chromium – molybdenum – vanadium cast steel. The examined material was the following cast steel grade: L21HMF and G17CrMoV5 – 10 (...
Crystallization of nodular cast iron with carbides
Theory of crystallization TDA method Nodular cast iron with carbides
2011/3/17
In this paper a crystallization process of nodular cast iron with carbides having a different chemical composition have been presented. It have been found, that an increase of molybdenum above 0,30% c...
Structure and properties of tool gradient materials reinforced with the WC carbides
Cemented carbides Tool gradient materials Powder metallurgy
2010/2/8
Purpose: The purpose of the paper is to describe sintered Tool Gradient Materials manufactured by powder metallurgy process. The Powder Metallurgy method has been chosen to manufacture tool gradient m...
Development of a feedstock formulation based on PP for MIM of carbides reinforced M2
Powder metallurgy Extrusion Feedstock Tool materials
2010/2/8
Purpose: Influence of binder composition on some selected properties of feedstock contained powder of M2 with 10% of carbides powders are demonstrated in the paper.
Design/methodology/approach: Torqu...
Structure and properties of hot-work tool steel alloyed by WC carbides by a use of high power diode laser
Heat treatment Laser Tool materials
2010/2/9
Purpose: The paper presents the effect of alloying with tungsten carbide on properties of the X40CrMoV5-1 steel surface layer, using the high power diode laser (HPDL).
Design/methodology/approach: Th...
期刊信息
篇名
Structural and magnetic properties of arc-melted RFe10V12 carbides(R=Y or Sm)
语种
英文
撰写或编译
作者
董星龙
第一作者单位
刊物名称
J.Phys.Cond.Matter.
页面
8(1996)6079-6085
出版日期
年
月
日
文章标识(ISSN)
相关项目
含碳硼1:12型稀土过渡金属化合...
Carbides in Nodular Cast Iron with Cr and Mo
Innovative material and casting technologies Carbidic nodular cast iron
2011/3/11
In these paper results of elements microsegregation in carbidic nodular cast iron have been presented. A cooling rate in the centre of the cross-section and on the surface of casting and change of mou...