工学 >>> 力学 农业工程 林业工程 工程与技术科学基础学科 测绘科学技术 材料科学 矿山工程技术 石油与天然气工程 冶金工程技术 机械工程 光学工程 仪器科学与技术 动力与电气工程 能源科学技术 核科学技术 电子科学与技术 信息与通信工程 控制科学与技术 计算机科学技术 化学工程 纺织科学技术 印刷工业 服装工业、制鞋工业 轻工技术与工程 食品科学技术 土木建筑工程 水利工程 交通运输工程 船舶与海洋工程 航空、航天科学技术 兵器科学与技术 环境科学技术 安全科学技术 工业设计
搜索结果: 31-45 共查到工学 Coupling相关记录61条 . 查询时间(0.082 秒)
Significant amounts of ammonia, nitric acid and hydrochloric acid as ammonium particle precursors have been found in urban polluted air. In order to advance understanding the formation and dissociati...
A new technology was developed to couple the anaerobic digestion of food wastes with production of polyhydroxyalkanoates (PHAs). Acetic, propionic, butyric and lactic acids were produced during food w...
利用扫描电子显微镜、傅里叶红外光谱仪和视频光学接触角测量仪对蜻蜓翅膀表面的微观结构、物质成分以及疏水性进行了研究,分析了蜻蜓翅膀表面微观结构、物质成分与翅膀表面疏水性能间的关系。结果表明,蜻蜓翅膀表面分布大量纳米级乳突结构,致使液滴与翅膀表面形成复合接触,增强了翅膀表面的疏水性;翅膀表面覆盖的蜡质层对蜻蜓翅膀表面的疏水性起增强作用。此外,利用Cassie模型建立了蜻蜓翅膀表面疏水方程,并进行了蜻蜓...
This paper presents investigations on the possible combination of modular high-temperature gas-cooled reactor (MHTGR) technology with the supercritical (SC) steam turbine technology and the prospectiv...
利用CFD平台的滑动网格法与混合模型模拟液力偶合器流场的瞬态流动,得到偶合器内部速度与压力分布。总结了不同充液率下流场结构的变化及两相分布情况。基于速度、压力数值解计算了液力偶合器叶轮转矩,并计算出不同充液率下液力偶合器的原始特性。将性能预测结果与实验进行了对比分析,结果表明,数值模拟计算结果与实验结果吻合较好,基本反映了流道内部流动的基本特征。
This paper shows how to analyze plasmonic metal-insulator-metal waveguides using the full modal structure of these guides. The analysis applies to all frequencies, particularly including the near infr...
The single-photon transport in a single-mode waveguide, coupled to a cavity embedded with a two-level atom, is analyzed. The single-photon transmission and reflection amplitudes, as well as the ...
We analyze the single-photon transport in a single-mode waveguide coupled to a whispering-gallery-type resonator interacting with a two-level atom. The single-photon transport properties such as the t...
The kinetics of oxidative coupling of methane reaction over a Na/BaTiO3/MgO catalyst was studied under differential conditions in a fixed bed flow reactor. The experiments were carried out at 725, 77...
采用CFD软件STAR-CD和FEA软件ABAQUS对226B型柴油机缸盖冷却水腔内的流动和传热过程进行了流固耦合数值模拟计算。为反映沸腾传热的影响,基于FORTRAN语言开发了单相流沸腾传热模型,将其嵌入到STAR-CD中。与试验结果的比较表明,加入沸腾传热模型可以大幅度提高模拟计算的精度,最大误差由18%下降至7%,为柴油机冷却水腔的优化设计提供了理论依据。 Fluid-solid coupl...
The energy coupling rate during welding of Al-Mg-Si alloys with a CO2 laser and a Nd:YAG laser was measured calorimetrically. The coupling rate obtained with the Nd:YAG laser was higher than that with...
Small vibration sensors with the laser interferometer have been developed. However, there are some disadvantages, for example, weakness to external vibration, difficulty in optical alignment, and so o...
通过对鼓式制动器惯性制动时蹄鼓摩擦接触状态分析,考虑接触副摩擦因数温度特性,以EQ1208车后桥鼓式制动器为例,对建立的鼓式制动器热—机耦合三维有限元模型进行了惯性制动工况数值仿真,得到了鼓式制动器耦合瞬态温度场仿真结果。A测试点温升试验结果与仿真结果对比,两者变化趋势相同,且吻合较好。对在惯性制动工况下的鼓式制动器温升主要影响因素(车速和道路坡度)进行了仿真分析。
The purpose of this paper is to present an approach for the investigation of in-plane strain distribution at the grain scale in polycrystalline materials. The technique is developed by coupling digita...
This present study has for principal objective to treat secondary effluents of the Staoueli purification plant (Algeria) with the average characteristics in the Chemical Oxygen Demand (COD) is 76 mg L...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...