搜索结果: 31-45 共查到“机械工程 control”相关记录58条 . 查询时间(0.149 秒)
RESEARCH OF THE POSSIBILITY OF APPLICATION OF VECTOR QUANTISATION METHOD FOR EFFECTIVE PROCESS CONTROL OF ROCKS DISINTEGRATION BY ROTARY DRILLING
vibro-acoustic signal rotary drilling identification
2009/10/23
The subject of the paper is investigation of the properties of concurrent vibro-acoustic signal in the process of
rock massif separation with the method of rotary drilling. The aim is to investigate ...
Self-Tuning and Conventional Control of an Industrial Scale Packed Distillation Column
Self-Tuning Control Conventional Control Packed Distillation Column
2009/10/15
The performance of self-tuning and a variety of conventional control strategies are examined when applied to the overhead product composition control of a packed distillation column. These control str...
Gain Scheduling Adaptive Model Control
Adaptive Control Adaptive Model Control Gain Scheduling Time Varying Plants
2009/10/14
Adaptive Model Control (AMC) is an adaptive control methodology that makes use of FIR (Finite
Impulse Response) adaptive modeling and that requires a minimum of a priori knowledge about the plant to ...
Robust Control of Active Suspensions Using Sliding Modes
Sliding mode Active suspension Ride comfort Robust control
2009/10/13
In this study, a four degrees of freedom vehicle model is used in order to design and check the performance of sliding mode controlled active suspensions. Force actuators are mounted parallel to the s...
THE VEINING STRUCTURE METHOD, THE FINITE ELEMENT METHOD IN THERMAL DEFORMATION DETERMINATION FOR THE MAIN SPINDLE AT NUMERICHAL CONTROL LATHES
finite element thermal deformation main spindle
2009/10/13
In the determination of the process accuracy on CNC lathe it is very important to know the thermal deformations. This article presents a new solution to obtain the thermal deformations at the principa...
Sliding Mode Control of a Multi-Degree-of-Freedom Structural System With Active Tuned Mass Damper
Sliding mode control active tuned mass damper (ATMD) multi-degree-of-freedom structure
2009/10/13
In this study, a sliding mode control system is designed for a multi-degree-of-freedom structure having an Active Tuned Mass Damper (ATMD) to suppress earthquake or wind induced vibration. Since the m...
A Comparison of Different Control Laws in Trajectory Control for a Revolute-Jointed Manipulator
Adaptive control Robust control Sliding mode control Parameter uncertainty Tracking error
2009/10/12
This study presents a comparison of dierent control laws for the trajectory control of a revolute-jointed manipulator. For this purpose, adaptive, robust and sliding mode control algorithms are appli...
Active Control of Residual Vibrations of a Cantilever Smart Beam
Active vibration control Finite element method Moving load Piezoelectricity
2009/10/9
The aim of this study is to control the residual vibrations of a clamped-free beam subjected to a moving load. The dynamic response of the beam is calculated by using the finite element method in orde...
Automatic Control of Electrodes in Lithotripsy Machine
Automatic Control Electrodes Lithotripsy Machine
2010/1/15
Automatic Control of Electrodes in Lithotripsy Machine.
异构数控系统的网络化集成制造技术(Networked Integration Manufacturing Based on Different Numerical Control Systems)
网络化制造 信息集成 公共对象请求代理体
2009/8/11
为适应网络化制造的功能要求,构建了基于车间异构数控系统的网络化集成通信体系结构。该结构体系融合了设备层信息与车间层控制、管理信息,可实现底层设备与上层应用系统之间的信息交换与融合集成;建立了通信体系的网络通信机制,并论述了应用设备的信息集成,以及与企业内部系统基于公共对象请求代理体系结构的信息集成和与外部系统基于Web服务的信息集成。该方案有助于网络化制造环境下企业内部或企业间的制造信息集成。
液压挖掘机功率匹配与动力源优化综合控制策略Control Strategy of Power Matching and Power Sources Optimization for Hydraulic Excavators
液压挖掘机 功率匹配 混合动力
2009/5/18
现有的液压挖掘机功率匹配方法由于负载工况的剧烈波动和不可预知性,导致动力源工作点很大部分分布于高油耗区域,动力源本身效率无法得到提高,从而影响了整机效率。为此,提出了一种基于混合动力技术的液压挖掘机全局功率匹配与动力源优化的综合控制策略。该策略以传统功率匹配方法为基础,结合混合动力的特点,在实现动力源、液压泵和负载三者功率匹配的同时,优化动力源的工作点,提高整机的燃油经济性。试验表明采用该策略的液...
Process control using reliability based control charts
Availability Process reliability Control charts
2010/1/19
Purpose: The paper presents the method to monitor the mean time between failures (MTBF) and detect any
change in intensity parameter. Here, a control chart procedure is presented for process reliabil...
Control and path prediction of an Automate Guided Vehicle
Automate Guided Vehicle (AGV) PID control
2010/1/19
Purpose: In this paper a new architecture and control strategy of an AGV is proposed. It is organized as follows.
The system architecture is explained in section 2. Section 3 deals with the kinematic...
Control of the laminar boundary layer around a profile by suction
boundary layer laminar two-dimensional
2010/9/27
A laminar and two-dimensional incompressible boundary layer around a profile and its control using suction is studied numerically. The study is based on the Prandtl boundary layer model. Using the met...
Quality control for the continuous casting process using electromagnetic transducers
Continuous casting process Electromagnetic transducers Solidification point
2010/1/20
Purpose: The continuous casting process is controlled automatically because various sensors and control units
are connected to the mold and lower tundish roll. The solidification point in the process...