搜索结果: 1-15 共查到“工学 Design”相关记录1291条 . 查询时间(0.218 秒)
Design, synthesis and biological evaluation of dehydroabietic acid derivative as potent vasodilatory agents
Dehydroabietic acid Vasodilation Inflammation Endothelial nitric oxide synthasec GMP
2023/11/30
Using dehydroabietic acid as the lead compound for structural modification, 25 dehydroabietic acid derivatives were synthesized. Among them, compound D1 not only showed the strongest relaxation effect...
Academy of Mathematics and Systems Science, CAS Colloquia & Seminars：Numerical simulation and optimal design of fissure karst type high-temperature thermal storage and development
裂隙岩溶型 高温储热开发 数值模拟 优化设计
2023/11/6
我国中低温地热直接利用世界第1，包括温泉洗浴、空间供暖等；高温地热资源储量虽然丰富，但其发电仅排世界第18，利用率不高。裂隙岩溶型地热资源作为主要高温地热资源类型，我国隐伏碳酸盐岩面积达250万平方公里以上，初步估算0-3km深度区间的热能量相当于5000-50000亿吨标煤，雄安是典型地区；同时，我国油气伴生缝洞型地热资源丰富，具有埋藏深、温度高的特点。对此，基于离散缝洞网络模型，形成了考虑渗流...
Computer-Aided Polymer Design: Integrating Group Contribution and Molecular Dynamics
Polymer Design Integrating Group Contribution Molecular Dynamics
2023/6/19
Polymers are widely used to manufacture many chemical products. Often, polymers are designed by trial-and-error, which is expensive and time-consuming. In this work, a new optimization-based computer-...
Design and control of a novel side-stream extractive distillation column for separating methanol-toluene binary azeotrope with intermediate boiling entrainer
Side-stream extractive distillation column intermediate boiling entrainer Dynamic control Binary azeotrope Methanol-toluene
2023/6/19
It is innovative and important to perform complex binary azeotrope separation via single distillation column. In the article, design and control of a novel and simple side-stream extractive distillati...
Computer-aided reaction solvent design considering inertness using group contribution-based reaction thermodynamic model
CAMD MINLP model Reaction solvent Group contribution Inertness
2023/6/19
Solvents have been widely used in process manufacturing industries. When involved in liquid-phase organic synthesis reactions, solvents can reduce the activation energy of reactions between the reacta...
Machine learning-based atom contribution method for the prediction of surface charge density profiles and solvent design
atom contribution computer-aided molecular design decomposition-based algorithm machine learning
2023/6/19
Solvents are widely used in chemical processes. The use of efficient model-based solvent selection techniques is an option worth considering for rapid identification of candidates with better economic...
Design and comparison of conventional and side-stream extractive distillation sequences for separating the methanol-toluene binary azeotrope with intermediate boiling entrainer
Side-stream extractive distillation Separation sequences Intermediate boiling entrainer Eco-efficiency analysis Methanol-toluene
2023/6/19
The side-stream extractive distillation (SSED) system is attracting widespread attention due to its high eco-efficiency. In the article, three double-column SSED (DC-SSED) sequences and two single-col...
Integrated solvent-process design methodology based on COSMO-SAC and quantum mechanics for TMQ (2,2,4-trimethyl-1,2-H-dihydroquinoline) production
Solvent design Process design COSMO-SAC Quantum mechanics 2,2,4-trimethyl-1,2-H-dihydroquinoline
2023/6/19
TMQ (2,2,4-trimethyl-1,2-H-dihydroquinoline) is an important antioxidant because of relatively low price and ease of application in rubber production technologies. However, due to the limited experime...
【Soft Matter Lecture 131】By-design Functional Polymeric Materials Enabled by Dynamic Covalent Chemistry
Functional Polymeric Materials Dynamic Covalent Chemistry
2023/6/19
【Soft Matter Lecture 131】By-design Functional Polymeric Materials Enabled by Dynamic Covalent Chemistry
Jacobs has been awarded a contract to design and engineer maintenance systems for the International Thermonuclear Experimental Reactor (ITER) fusion project.
WENRA calls on industry to help expedite reactor design assessments（图）
WEMRA 反应堆设计 西欧核监管机构协会
2023/4/17
The Western European Nuclear Regulators Association (WENRA) has set out the steps that industry must take to ensure the timely, harmonised licensing of small modular reactor (SMR) and advanced modular...
Scientists use computational modeling to design “ultrastable” materials（图）
计算建模 “超稳定”材料 金属有机框架
2023/6/6
Materials known as metal-organic frameworks (MOFs) have a rigid, cage-like structure that lends itself to a variety of applications, from gas storage to drug delivery. By changing the building blocks ...
Rolls-Royce SMR Limited's 470 MWe small modular reactor (SMR) design has successfully completed Step 1 of the UK's Generic Design Assessment (GDA) process and progressed to the next phase.
Modern fabrication tools such as 3D printers can make structural materials in shapes that would have been difficult or impossible using conventional tools.
华南理工大学电子与信息学院薛泉、廖绍伟两位教授指导的Reconfigurable Future学生团队晋级IEEE-APS Student Design Contest半决赛
薛泉 廖绍伟 Reconfigurable Future IEEE-APS Student Design Contest 红外感知 电磁波
2024/4/17
薛泉、廖绍伟俩教授指导的Reconfigurable Future团队参加IEEE天线与传播学会2023年度学生设计竞赛（2023 IEEE AP-S Student Design Contest），成功晋级半决赛。该比赛今年收到来自全球近百个团队提交的方案，最终6个团队进入半决赛。Reconfigurable Future团队由我院学生胡志鹏（博士生）、王宇琦（博士生）、全国海（本科生）和陈雪龙...