搜索结果: 1-4 共查到“有色金属及其合金 Cooling rate”相关记录4条 . 查询时间(0.125 秒)
Cooling rate influence on microstructure of the Zn-Al cast alloy
Metallic alloys Derivative thermo analysis Zn-Al alloy Microstructure
2010/8/17
Properties of cast zinc alloys are comparable to these of aluminium alloys. Differences are connected to a lower melting temperature and bigger density. Zinc has a density of 7.14g/cm3, melting temper...
Derivative thermo-analysis application to assess the cooling rate influence on the microstructure of Al-Si alloy cast
thermo-analysis assess cooling rate microstructure Al-Si alloy cast
2010/8/12
Copper and magnesium addition enable to perform precipitation hardening of the multicomponent aluminium alloys with silicon, by precipitation of the Al2Cu or Mg2Si phase particles. However copper addi...
Influence of cooling rate on
cast Ni – base superalloy carbides and Jc - phase metallographic evaluation heat treatment cooling rate influence
2011/3/30
The Ni – base superalloys, which are combined an unique physical and mechanical properties, are used in aircraft industry for production of aero engine most stressed parts, as are turbine blades. From...
Influence of cooling rate on
cast Ni – base superalloy carbides and Jc - phase metallographic evaluation heat treatment cooling rate influence
2011/3/30
The Ni – base superalloys, which are combined an unique physical and mechanical properties, are used in aircraft industry for production of aero engine most stressed parts, as are turbine blades. From...