搜索结果: 1-15 共查到“复合材料 Mechanical properties”相关记录15条 . 查询时间(0.1 秒)
Stretchable polyurethane sponge reinforced magnetorheological material with enhanced mechanical properties
magnetorheological 3D network supporting polyurethane sponge
2015/3/24
A stretchable magnetorheological material (SMRM) consisting of micro-meter carbonyl iron (CI) particles, low cross-linking polyurethane (PU) polymer and porous PU sponge has been developed. Due to the...
Preparation and mechanical properties of the magnetorheological elastomer based on natural rubber/rosin glycerin hybrid matrix
Natural rubber magnetorheological elastomers rosin glyceride wettability CI particle dispersion matrix by rheometer measurements
2015/3/24
To improve the mechanical properties of the natural rubber based magnetorheological elastomers (MREs), rosin glycerin ester was added into the carrier matrix to enhance wettability and dispersibility ...
Measuring Mechanical Properties of 3D Carbon/Carbon Composite Using Automated Grid Method
carbon carbon composites mechanical properties non-contact measurement method automated grid method Iosipescu shear test
2015/3/26
A precise measurement, which was based on the automated grid method, was developed to analyze the mechanical properties of a three-dimensional reinforced carbon/carbon composite under tensile and shea...
Studies on Mechanical Properties, Thermal Degradation, and Combustion Behaviors of Poly(1,4-butylene terephthalate)/Glass Fiber/Cerium Hypophosphite Composites
Glass fiber reinforced polyethylene ethylene glycol ester phthalate composite materials flame retardant performance
2015/3/30
This work aims to develop glass-fiber reinforced poly(1,4-butylene terephthalate) (GRPBT) composites with enhanced mechanical, thermal stability, and flame retardancy properties using a novel compound...
Temperature-Dependent Mechanical Properties and Model of Magnetorheological Elastomers
Magnetorheological elastomers magnetic particles and iron particles soft rubber elastic modulus damping a magnetic field
2015/3/30
Magnetorheological elastomers (MREs) are composed of magnetizable particles (iron particles) and a soft rubberlike matrix. Their mechanical properties, including modulus and damping capability, depend...
High-performance hybrid magnetorheological materials: preparation and mechanical properties
Magnetorheological elastomers mechanical properties magnetorheological elastomers magnetorheological gel nonlinear dynamics
2015/3/30
To improve mechanical performance of magnetorheological elastomers (MREs), two novel hybrid magnetorheological elastomers that were embedded with magnetorheological fluids (MRFs) and magnetorheologica...
Investigation of Influences of Pressing Pressure and Sintering Temperature on the Mechanical Properties of Al-Al4C3 Composite Materials
Mechanical alloying Aluminum Carbide Mechanical properties
2009/10/12
In this study, Al powders containing 3% wt carbon black were mechanically alloyed in a high energy ball mill for 20 h. Mechanically alloyed powders were compacted at various pressures (400, 500, 600, ...
Influence of Heat Treatment on the Mechanical Properties of AA6066 Alloy
Al alloy 6xxx series Deformation Grain size Microstructural characterization
2009/10/9
The microstructural and mechanical characterization of heat treatable 6xxx (Al-Mg-Si-Cu based) wrought aluminum alloys was studied. The aim of this work was to produce a fine grained, high strength 6x...
Mechanical properties and corrosion behaviour of 18Cr-11Ni-2,5Mo cast steel
Stainless cast steel Cr-Ni Mechanical properties Electrochemical corrosion
2011/4/1
The study discusses the effect of variable carbon concentration (0,02; 0,07 and 0,14%) on the mechanical properties and corrosion resistance in 3,0% NaCl solution of 18Cr-11Ni-2,5Mo austenitic cast st...
Influence of cooling rate on the structure and mechanical properties of G17CrMoV5 - 10 cast steel
Heat treatment Mechanical properties Cast steel Bainite
2011/3/31
The paper presents results of research on the influence of cooling rate on the structure and properties of G17CrMoV5 – 10 (L17HMF) cast steel. The material for research was a section taken out from...
Influence of cooling rate on the structure and mechanical properties of G17CrMoV5 - 10 cast steel
Heat treatment Mechanical properties Cast steel Bainite
2011/3/31
The paper presents results of research on the influence of cooling rate on the structure and properties of G17CrMoV5 – 10 (L17HMF) cast steel. The material for research was a section taken out from...
Studies of structural and mechanical properties of aluminum skeleton castings
Skeleton casting Structure Compression strength AlSi alloy
2011/3/31
Skeleton castings were manufactured in accordance to elaborated production technology. The subject of the research was the microstructural analysis of non - monolithic castings. Analysis of metallogr...
Studies of structural and mechanical properties of aluminum skeleton castings
Skeleton casting Structure Compression strength AlSi alloy
2011/3/31
Skeleton castings were manufactured in accordance to elaborated production technology. The subject of the research was the microstructural analysis of non - monolithic castings. Analysis of metallogr...
Morphology, thermal and mechanical properties of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites from organic-modified montmorillonite
Montmorillonite Nanocomposites OMT-CPC OMT-P16 Organic-modified montmorillonite Poly styrene-acrylonitrile
2015/3/30
Poly (styrene-acrylonitrile) (SAN)/clay nanocomposites have successfully been prepared by melt intercalation method. The hexadecyl triphenyl phosphonium bromide (P16) and cetyl pyridium chloride (CPC)...
Selected mechanical properties of aluminum composite materials reinforced with SiC particles
Cast composites Silicon carbide Mechanical properties
2011/3/15
This work presents the results of research concerning influence of ceramic particles’ content of silicon carbide on selected mechanical properties of type AW-AlCu4Mg2Mn - SiC composite materials.