搜索结果: 1-8 共查到“冶金工程技术 Metal”相关记录8条 . 查询时间(0.109 秒)
Look Ma,No Hands:Researchers Use Vacuum for Hands-Free Patterning of Liquid Metal
Look Ma No Hands Researchers Vacuum Hands-Free Patterning Liquid Metal
2017/9/5
This paper describes the utilization of vacuum to fill complex microchannels with liquid metal. Microchannels filled with liquid metal are useful as conductors for soft and stretchable electronics, as...
New metal alloy could yield green cooling technologies
New metal alloy green cooling technologies
2015/11/12
A promising new metal alloy system could lead to commercially viable magnetic refrigerants and environmentally friendly cooling technologies, according to a scientist at Rochester Institute of Technol...
Competitive Biosorption of Chromium(VI),Iron(III) and Copper(II) Ions From Binary Metal Mixtures By R.arrhizus and C. vulgaris
Waste water Heavy metal ions Competitive biosorption
2009/10/15
In this study, the simultaneous adsorption process of Cr(VI), Fe(III) by R. arrhizus and C. vulgaris and Cu(II) in pairs of metal mixtures were investigated and compared to single component systems. T...
The stress of machine parts for pressure die casting and dies that are in contact with liquid metal influencing their service life
Pressing sleeve Piston Die casting process Heat fatigue Service life Die temperature
2011/3/15
Stress of material surface at die, pressing sleeve and piston in pressure die casting process from liquid alloys is analysed. That is heat fatigue and heat and chemical effect of liquid alloys. The me...
Influence of SiC particles on the heat exchange at the metal-mould interface during composite flow along the mould channel
Composites Heat exchange Heat transfer coefficient Thermal analysis Aluminum alloys
2011/3/15
Calculation results concerning the heat transfer coefficient at the metal-mould interface during flow of the AlMg10 alloy matrix composites containing various fractions of solid SiC particles and, for...
The Institute of Metal Finishing：Mission Statement："To provide a focus for Surface Engineering within the UK through the fulfilment of the technical, educational and professional needs at all levels f...
Evaluation of the heat transfer coefficient at the metal-mould interface during flow
Heat exchange Heat transfer coefficient Thermal analysis Aluminium alloys
2011/3/11
Calculation results concerning the heat transfer coefficient at the metal-mould interface during flow of the AlMg10 alloy in the channel-like cavity of the spiral castability test mould.
Knowledge Representation of Casting Metal Defects by Means of Ontology
Castings defects Knowledge formalization Knowledge bases creation
2011/3/11
The scattered nature of information requires implementation of appropriate tools and system solutions. The conception of decentralized diagnostic system of casting metal defects, in which the methods ...