搜索结果: 1-15 共查到“机械工程 CNC”相关记录23条 . 查询时间(0.067 秒)
哈尔滨理工大学数控技术课件第1章 计算机数控(CNC)装置
哈尔滨理工大学 数控技术 课件 第1章 计算机数控(CNC)装置
2018/12/19
哈尔滨理工大学数控技术课件第1章 计算机数控(CNC)装置。
长春工业大学数控技术课件第五章 计算机数控（CNC）装置。
长春工业大学数控技术课件第四章 计算机数控（CNC）装置
长春工业大学 数控技术 课件 第四章 计算机数控（CNC）装置
2017/6/7
长春工业大学数控技术课件第四章 计算机数控（CNC）装置。
视频：西安交通大学核反应堆热工分析数控技术第三章第六节 CNC装置的接口电路教学录像。
视频：西安交通大学核反应堆热工分析数控技术第三章第五节 CNC装置的接口电路教学录像。
视频：西安交通大学核反应堆热工分析数控技术第三章第三节 CNC软件结构教学录像。
视频：西安交通大学核反应堆热工分析数控技术第三章第二节 CNC装置硬件结构教学录像。
视频：西安交通大学核反应堆热工分析数控技术第三章第一节 CNC装置结构教学录像。
针对滚齿数控加工的自动编程问题,提出一种基于成组技术和标准模板的滚齿CNC自动编程方法。利用成组技术原理,根据齿轮的几何特征和工艺特征的相似性对齿轮工件进行分类,利用每类齿轮单元的滚削数学模型,在工艺决策知识库支撑下确定出滚齿加工的工艺参数;根据滚削数控代码结构的相似性,运用字面相似度算法建立滚齿加工参数化控制标准模块库,组建每类齿轮单元的NC参数化代码模板,并运用表达式驱动算法完成对代码模板的实...
Key Technology of Embedded System Implementation for Software-based CNC System
software-based CNC system embedded system implementation
2011/8/3
The software-based computer numerical control(CNC) system includes three types of tasks, periodic real-time tasks, aperiodic real-time tasks, and non-real-time tasks. The tasks are characterized by co...
Introduction of serial architecture for small CNC facilities
Open-architecture control Industrial networks Controller
2009/12/14
Purpose: The concept of open-architecture control, which has been used as a main method of control in many branches such as automatic systems of machining, robotics, testing and control, causes a grea...
Heat loss optimisation in CNC motors
Resistant forces Open-architecture control Free-running pulse width modulated driver
2009/12/3
Purpose: Heat loss plays very important role in CNC systems, especially in suspension systems with permanent load
that are usually used for testing, detection and automatic cutting, the adjusting of ...
GA based CNC turning center exploitation process parameters optimization
multi-objective optimization machining parameters genetic algorithm
2009/10/23
This paper presents machining parameters (turning process) optimization based on the use of artificial intelligence. To obtain greater efficiency and productivity of the machine tool, optimal cutting ...
Time Minimization of CNC Part Programs in a Vertical Machining Center in Terms of Tool Path and Cutting Parameter Criteria
Cutting parameters Tool path planning Machining time NC program
2009/10/10
An algorithm was prepared for minimizing the machining time of CNC part programs used in a vertical machining center. The CNC program is transferred from the machine to the CNC code editor with a seri...
Comparison of Regression and Artificial Neural Network Models for Surface Roughness Prediction with the Cutting Parameters in CNC Turning
Regression Artificial Neural Network Models Surface Roughness Prediction Cutting Parameters CNC Turning
2009/9/4
Surface roughness, an indicator of surface quality, is one of the most specified customer requirements in machining of parts. In this study, the experimental results corresponding to the effects of di...