搜索结果: 1-10 共查到“安全科学技术 design”相关记录10条 . 查询时间(0.119 秒)
DESIGN OF APPLICATION ARCHITECTURE FOR SPATIAL INFORMATION BASED VOLCANIC DISASTER RESPONSE SYSTEM
volcanic disaster spatial information based response system application architecture
2018/4/18
The Korean Government has executed the research project named “The development of volcanic disaster response system”. The phase I of this project was completed at 2015. From the year 2015, phase II of...
The Application of Fire Risk Assessments in Building Design and Management
Fire Risk Assessments Building Design
2013/10/14
For the vast majority of history, fire risks have not been assessed for the design of buildings, so why start now? There are a number of answers to this question, but the primary motivation is to avoi...
Discussion on the Fire Safety Design of a High-rise Building
high-rise residential building fire protection design fire lift
2015/8/10
There are several problems in the fire safety design of a high-rise
residential building: the staircase for evacuation can't run from the top to the ground and the occupants can't directly evacuate t...
A study on Safety Design Requirements against Nullification of Safeguards for Industrial Machines
Safety Design Requirements Nullification Safeguards Industrial Machines
2013/9/30
This paper proposes a safety design to prevent labor accidents due to the nullification of safeguards. Causes of nullification are specified in cases of accidents involving industrial machinery. They ...
Design Optimization of Stress Relief Grooves in Lever Guide of Pressure Vessel for Food Processing
Stress Relief Groove Stress Concentration Factor Finite Element Analysis Pressure Vessel
2013/1/28
A stress relief groove is introduced in the R area and the stress is analyzed using a finite element method (FEM). Then the relief of the stress concentration in the vicinity of the pressure vessel is...
The impact of tunnel design and lighting on the performance of attentive and visually distracted drivers
Tunnel Driving performance Distraction Illumination Design Visual load Secondary task
2012/4/26
The crash risk in tunnels is lower than on the open road network, but the consequences of a crash are often severe. Proper tunnel design is one measure to reduce the likelihood of crashes, and the obj...
Establishment of generic transformations for geotechnical design parameters
Transformation uncertainty Geotechnical design parameter Reliability-based design Correlation CPTU tests Undrained shear strength
2012/4/26
Geotechnical design parameters are typically estimated based on the transformations from site investigation results. In general, one expects the transformation uncertainty to change depending on the n...
Fail-Safe Design by Outer Cover of High Pressure Vessel for Food Processing
Food Processing, Pressure Vessel, Fail-Safe Design, Safety Engineering
2013/1/28
This paper demonstrates the effectiveness of outer-cover of pressure vessel in order to prevent risk scenario by brittle fracture. The Fail-Safe design introducing the concept of a standby redundant s...
Using process stream index (PSI) to assess inherent safety level during preliminary design stage
Inherent safety Preliminary design Streams index Inherent safety index
2012/4/14
In the current practice, safety assessment is conducted once the process design has been completed. At this stage of design, the freedom to change the conceptual design is very limited and whatever st...
Improving safety and health in construction: the need for action during procurement, design and planning, construction and maintenance
safety health in construction procurement design planning construction maintenance
2014/4/25
The European Week for Safety and Health at Work in 2004 focused on the construction industry. It was launched in April 2004 and is the largest occupational safety and health campaign ever to take plac...